Allow the solution to act for 20 min. Scrub with a contact pad/shampooing brush and wet vacuum the dirt. Rinse with clean water and wet vacuum. Leave to dry thoroughly.
2nd Step: Jontec Tensol (Dosage 10-20%)
Manual:
Wet mopping: Dose the product into a bucket filled with water, apply the solution with a clean mop and
allow the solution to dry. Buff for extra shine.
Maintenance cleaning
Jontec Tensol (Dosage 0.5-5%)
Manual:
Wet moping: Dose the product into a full bucket, apply the solution and remove the soiled solution.
Machine:
Scrubber-drier with contact pad or shampooing brush: Dose the product into the full water tank, apply the solution and remove the soiled solution.
Deep cleaning (only if necessary)
Jontec Forward (Dosage 5%)
Manual: Dose product into a bucket filled with water and apply the solution.
Allow to act (do not allow the solution to dry) and scrub, then remove the soiled
solution.
Machine: Scrubber-drier with contact pad or shampooing brush: Dose product into the full water tank and apply the solution. Allow to
act (do not allow the solution to dry) and scrub, then remove the soiled solution.
Selective cleaning (stubborn soiling,stains,...)
Sprint Performer or Sprint Spitfire
Light soiling: Spray the product onto a cloth/sponge and apply to the surface.
Leave to act. Scrub if necessary, and wipe clean.
For tough stains: Spray product directly on the surface and allow to act for a
moment. Scrub if necessary, and wipe clean.
No rinsing needed.
- 
- 
- 
- 
